 |
| Installation of cable tray |
|
ACTIVITY |
HAZARDS |
CONTROL MEASURES |
|
ABLE LAYING |
·
Improper
Manual Handling ·
Weight
of cables ·
Lack
of supervision ·
Improper PPEs ·
Slip
& Trip ·
Dust
Particle ·
Hot
weather |
- Obtain PTW before the start of the activity. - Conduct toolbox talk - Hand tools and equipment are placed at desired locations that do not interfere with the working area. - All the staff present shall be trained on safe manual handling techniques. - The activity shall be properly supervised by a competent person. - The working area shall be barricaded and signposts shall be placed. - All the mandatory PPEs shall be provided to staff. - Watch your steps avoid to slipping & trip - Proper access with steps in the excavation area - Use a dust mask - Arrange a rest area, fresh drinking water, and frequent breaks shall be provided. - Get help sharing the load |
|
Installation
of Cable Tray |
Sharpe edges Falling objects Weight of trays Working at height Improper manual handling |
-
Skilled & experienced technicians and the
worker shall be involved in the activity. -
Barricaded falling objects area -
Wear proper PPE as required -
Wear proper hand gloves and avoid Sharpe's
adages -
Weight of cables trays share get help -
Increase the number of workers during the
installation of cable trays -
Follow proper manual handling techniques for
cable tray installation -
Use a full-body harness belt at work at a
height -
Ensure proper scaffold platform with green tag
inspection -
Display safety signs for the area of the
falling object |
|
Installation
of CT, VT, CVT & SA |
·
Unskilled
workers ·
Faulty
tools ·
Work
at height ·
Falling
objects |
- Ensure skilled workers shall be involved in the activities - Ensure hand tools and equipment shall be inspected before the start of the work and shall be inspection tagged. - Anti-slip and cotton gloves shall be provided to workers along with other appropriate PPEs. -
Follow proper manual handling techniques for
cable tray installation - Use a full-body safety harness belt - Use inspected scaffold platform with a green tag - Barricaded falling objects area - Tools should be attached with a tool tie - Display safety signs about falling objects - Work shall be under close supervision. |
|
Installation of Conduit, Cable Laying, Lighting Fixtures, and Lighting Tubes, Fans and Exhaust Fans
|
·
Unskilled
technicians & workers ·
Faulty
tools ·
Work
at a height ·
Falling
objects ·
Slip
& Trip |
- Obtain PTW system - Trained & experienced technicians & workers should be involved in these activities - Hand tools and equipment shall be inspected before the start of the work and shall be inspection tagged. - Only limited and relevant tools and equipment shall be present on site - A tool tie shall be used - Tagging of tools and equipment shall be done -
Manual handling training shall be conducted
for workers - Use a full-body safety harness belt - Use inspected scaffold platform with a green tag - Barricaded falling objects area - Tools should be attached with a tool tie - Watch your steps to avoid slip & trip - Material & tools should be properly arranged - The material does not stack on the access |
|
Installation
of DBs and Base Work |
· Working on live Electricity ·
Overloading
power sockets ·
Spark
·
Electrocution
·
Using
the wrong tools for the job |
- Ensure trained & experienced technicians are involved in this activity - No work shall be allowed at the energized system. - Ensure before starting the work that the system is fully isolated and not energized. - Proper isolation of the system shall be tested before the work. - Hand tools/gloves used shall be of respected voltage ratings with isolated handles and shall be fit for work. -
Ensure the grounding was attached to the
grounding point -
Fire extinguishers available at the site -
Double insulation is to be provided on the
cables and proper cable management is to be ensured. -
Ensure not overloaded power sockets - All the work shall be carried on under supervision. - The area shall be properly barricaded before the start of work and signposts shall be placed. - Tools shall be inspected & tagged |
|
Lightening Work |
· Working at a height · Loose materials and unfit hand tools · Falling object · Slip, trip, and fall · Electrocution (Power Tools) |
-
Conduct
toolbox talks to highlight the hazards associated and controls that are
implemented for it. -
Hand
tools and equipment shall be inspected before work and all the damaged tools
shall be removed.
-
Work
at height training shall be provided to staff. -
Usage
of safety harness shall be ensured and it shall be inspected before work to
check for any damage/wear tear or incomplete part.
-
The
platform provided shall have sufficient space present to work freely.
-
The
platform shall be properly tied or placed on the surface to avoid any
movement.
-
All
the tools and equipment shall be tied or placed securely on the platform to
avoid a fall.
-
The
platform shall contain a proper anchoring point or it shall be placed near
the area where the anchoring point is present.
-
The
platform shall not be placed on an uneven surface or the base plate or sole
plate shall be placed in case it is placed. -
A
proper ladder shall be provided for safe access and agreement.
-
The
working area shall be barricaded with a safety sign -
The
working platform shall be inspected on routine bases.
-
Usage
of mandatory PPEs shall be ensured. -
The
working platform shall be placed closer to the working area or within reach of the person working.
-
Industrial
Socket shall be used. -
Proper
earthling of DB. -
In-house
training of all the staff on safe manual handling -
In-house
training of all the staff on working at height. -
Usage
of tool lanyard with pulley. -
The
safety harness shall be inspected and tagged (Red/Green) and it shall contain
double D-hooks. -
All
electrical connections/ cables/ sockets shall be properly inspected before the
execution of work. - Surface shall be done even before placing the platform |
|
Earthling Grounding Earthling/ Mesh Laying
|
· Uninspected tools & equipment · Overloading · Wrong lifting tools and tackles · Collapse of load · Improper Lifting preparations · Work at height · Falling objects |
- Hand tools and equipment shall be inspected before the start of the work and shall be inspected. - Trained & skilled workers shall be used for the activity - PPEs provide as per the required standards - Do not overload the during a lifting activity - Choose the correct tools & equipment - Use two tag lines for securing the load - Proper communication between riggers & operators - Stop the activity if it is bad weather (sand storm, high wind, heavy rain, fog) - PPEs must be ensured (Harness, shoes, helmets). - Ensure proper placement of tools and other equipment. - Brief working procedure. - Use properly inspected Manual/ Power tools and check tools before use. - Use a full-body safety harness - Choose the proper anchor point - Tools & equipment are attached with a tool tie -
Barricaded area
|
0 Comments